SPECIFIC MATERIALS
01 / ESD Table Mats
ESD Products Manufacturer & Supplier
ESD table mats, portable ESD kits and grounding accessories for electronics assembly and repair workstations. Custom sizes and small-batch orders.
CUSTOM SERVICE
02 / Custom-Cut Service
Custom ESD Mats & Kits
Send your dimensions or drawing. We confirm cutting options, grounding snap positions and accessory combinations, then prepare a quotation.
AT WORK
03 / ESD Table Mat MS-E001
For Assembly & Repair Workstations
Trusted on electronics assembly lines, repair benches and in laboratories, with two-layer construction for stable static control.
Small-Batch Orders
Order quantities suited to sample evaluation, trial sales and workstation projects.
Custom Sizes
Mat cutting and grounding snap positioning based on your requirements.
OUR ESD PRODUCTS
ESD products for every workstation.
Standard sizes, custom-cut mats and matching accessories, confirmed for each order.
ESD Table Mats
Anti-static table mats for workbenches, assembly stations and repair areas. Green, blue, gray and black.
Portable ESD Kits
Mat kits with matching wrist straps and grounding cords for repair technicians and service teams.
Custom-Cut Service
Mats cut to your drawing with grounding snap installation, text printing and date marking.
CUSTOM ESD MATS & KITS
Custom ESD mats, built for your workbench
Send your dimensions or drawing. We confirm cutting options, grounding snap positions and accessory combinations, then prepare a quotation.
Samples and small-batch orders supported.
Small-Batch Orders
Sample evaluation and trial sales
Clear Order Communication
Specs and packaging confirmed before each order
CUSTOM WORK
Custom-Cut ESD Mats
Cut to your drawing with grounding snaps installed at your required positions.
Colors
Green, blue, gray and black
Material
PVC, two-layer, 2 mm
Made for
Assembly, repair and laboratory benches
Custom cutting, grounding snap installation and kit assembly.
Cut-to-size / printing / marking
ESD CONTROL ESSENTIALS
Practical ESD protection for daily work.
Every mat is built around stable static control: a two-layer PVC structure, documented resistance ranges and cutting options matched to your workbench.
01 / Structure1
Two-layer PVC construction
A colored static-dissipative top layer over a black conductive backing layer keeps the work surface grounded during daily use.
PVC / 2 mm / two-layer
02 / Performance2
Documented electrical performance
Surface resistance 10⁶–10⁹ Ω, backing resistance 10³–10⁵ Ω and static decay time under 0.1 seconds.
10⁶–10⁹ Ω / 10³–10⁵ Ω / <0.1 s
03 / Custom work3
Cut and configured to your workbench
Mats cut to your drawing with grounding snap installation, text printing and date marking, plus matching accessories.
Cut-to-size / printing / marking
View Products
Best sellers and new arrivals
Start with the pieces customers reach for first: tactile carry goods, calm home tools, and small upgrades that make daily routines feel more intentional.
Fresh inventory is highlighted first, with category filters available on the full shop page.
View all products
ESD Table Mats
MS-E019 Green ESD Workbench Mat – Dual-Layer, Custom Sizes
Green ESD workbench mat with dual-layer construction: green dissipative surface layer and black conductive backing layer. Helps reduce static buildup. Flexible and tough, wear resistant, easy to clean, low odor. Custom sizes available, supplied as rolls or cut-to-size sheets.
Workshop Sticky Mat
CS-010 Workshop Sticky Mat – 30 Sheets, 4 Sizes
Workshop sticky mat with 30 peel-off sheets for dust control at entrances. Four standard sizes: 30x30 cm, 45x60 cm, 45x90 cm and 60x90 cm, custom sizes available. Blue, with white and custom colors available. Store flat upon receipt.
Workshop Sticky Mat
CS-025 Peel-Off Cleanroom Sticky Mat – 0.03 mm LDPE, 30 Layers
Peel-off cleanroom sticky mat made of 99.9% LDPE with water-based adhesive, 0.03 mm thick, 30 layers per mat. Tensile strength transverse 12 MPa or more and longitudinal over 20 MPa, sizes 18x36, 24x36 and 26x45 in, packed 10 mats per box. Disposable sheets for shoe sole dust control.
Workshop Sticky Mat
CS-004 Cleanroom Entrance Sticky Mat – Traps Dust from Shoe Soles
Cleanroom entrance sticky mat that traps dust from shoe soles. 30 numbered peel-off sheets with clear protective film, peel off one sheet at a time. Suits cleanrooms, electronics factories, laboratories, healthcare facilities and residential entrances.
Workshop Sticky Mat
CS-003 Anti-Static Peel-Off Sticky Mat – Numbered Tabs & Custom Sizes
Anti-static peel-off sticky mat with high-tack sheets for shoe sole dust control. 30 sheets with numbered peel tabs, clear protective film. Five standard sizes from 45x60 cm to 78x88 cm, custom sizes available.
Workshop Sticky Mat
CS-002 High-Tack Cleanroom Sticky Mat – Easy-Peel Tabs, Carton Packed
High-tack cleanroom sticky mat with 30 numbered peel-off sheets and easy-peel corner tabs for dust control at entrances. Blue and white, custom colors available. Standard and custom sizes, ships in carton packaging.
WHO WE SERVE
Serving electronics workspaces worldwide
Electronics manufacturers, repair businesses, industrial workbench suppliers and ESD product distributors.
Electronics manufacturers
Assembly lines and production areas that need stable static control at every workstation.
Repair businesses
Repair benches and service teams handling static-sensitive devices every day.
Distributors & suppliers
ESD product distributors, tool dealers and workbench suppliers adding ESD products to their range.
FAQ
Questions buyers ask before ordering
Ordering, customization and sample policies for ESD table mats, kits and accessories.
Still need help? Send us your requirements through the contact form.
Contact
Tell us what you need
Send your product requirements, dimensions, quantity and delivery postcode for a quotation.
Email
sales@specificmaterials.com
Phone
+86 18938503836 (WhatsApp)
Office
Room 307, Building 3, No. 18 Gangjian Road, Changping Town, Dongguan, Guangdong, China
Hours
Mon-Fri (GMT+8)
Inquiry intake
Send the details
Share a few details about your request so we can send a useful reply.