ESD Table Mats and Sheet Rolls: All 26 Models Compared
All 26 ESD table mat models (MS-E001–MS-E026) compared by material, thickness, surface resistance, colours and sizes, from the product pages.

All 26 ESD table mat and sheet roll models (MS-E001–MS-E026) are compared below by material, thickness, surface resistance, colours and sizes. Every value is taken from the model's own product page; a dash means that page does not publish the field.
The 26 Models Compared
| Model | Material | Thickness | Surface resistance | Colours | Sizes / supply form |
|---|---|---|---|---|---|
| MS-E001 | PVC, two-layer | 2 mm | 10⁶–10⁹ Ω | Green, blue, gray, black | Custom-cut; rolls or sheets, widths up to 1.5 m |
| MS-E002 | PVC, two-layer | 2 mm | 10⁶–10⁹ Ω | Green, blue, gray, black; white, brown, apple green on request | Custom-cut; rolls or sheets, widths up to 1.5 m |
| MS-E003 | PVC, two-layer | 2 mm | 10⁶–10⁹ Ω | — | Custom-cut to drawing (holes, notches, rounded corners, custom shapes) |
| MS-E004 | PVC, two-layer | 2 mm | 10⁶–10⁹ Ω | Green, blue, gray, black | Custom-cut; rolls or sheets, widths up to 1.5 m |
| MS-E005 | Rubber, two-layer | — | 10⁶–10⁹ Ω | Gray, blue, green | Custom-cut; rolls or sheets |
| MS-E006 | — | — | — | Green surface, black backing | Custom-cut; rolls or cut mats |
| MS-E007 | PVC, two-layer | 2 mm | 10⁶–10⁹ Ω | Blue | Custom-cut; rolls or sheets, widths up to 1.5 m |
| MS-E008 | Rubber, two-layer | — | 10⁶–10⁹ Ω | Green surface, black backing | Custom-cut; rolls or sheets |
| MS-E009 | — | — | — | Multiple colours (as shown on product page) | Custom-cut; rolls or sheets |
| MS-E010 | — | 2 mm (1 mm top + 1 mm backing) | — | Green, blue, gray, black | Rolls 10 m × 0.4–1.5 m (7 widths); custom-cut sheets |
| MS-E011 | — | 2 mm | — | Green (further colours as shown on product page) | Custom-cut; rolls or sheets |
| MS-E012 | PVC | 2 mm | — | Green surface, black backing | Custom-cut; rolls or sheets |
| MS-E013 | PVC | 2 mm | 10⁷–10⁹ Ω (green surface) | Green surface, black backing | Rolls or custom-cut sheets |
| MS-E014 | PVC | 2 mm | — | Green, gray, blue, teal (as shown) | Rolls and sheets; custom cutting |
| MS-E015 | Rubber | 2 / 3 / 5 mm | — | Green surface, black backing | Rolls or custom-cut sheets |
| MS-E016 | Rubber | 2–3 mm | — | Green surface, black backing | Widths 0.6–1.2 m, custom length; rolls or cut-to-size sheets |
| MS-E017 | Rubber | 2 / 3 / 5 mm (5 mm standard) | 10⁶–10⁹ Ω | Green surface, black backing; custom colours available | Max width 1.0 / 1.2 m; custom cutting and lengths |
| MS-E018 | Rubber | — | — | Green surface, black backing | Rolls and flat sheets, cut to size (sheets, rings, custom shapes) |
| MS-E019 | — | — | — | Green surface, black backing | Custom sizes; rolls or cut-to-size sheets |
| MS-E020 | PVC | — | 1.0 × 10⁵–1.0 × 10⁸ Ω (top-surface volume resistance) | Green, blue, gray, black | Custom sizes |
| MS-E021 | Rubber | 1–10 mm | 10⁶–10⁹ Ω | Green, black | Rolls 10 m × 1 m or 1.2 m; cut-to-size service |
| MS-E022 | Rubber | 1–10 mm | — | Green, black (glossy green finish) | Rolls 10 m × 1 m or 1.2 m; custom cutting |
| MS-E023 | Rubber | 2 / 3 mm | 10⁶–10⁹ Ω | Blue, teal green; matte green, blue, black, gray; glossy green | Cut to size |
| MS-E024 | Rubber | — | — | Matte green, blue, black, gray; glossy green | Cut to size |
| MS-E025 | Rubber | — | 10⁶–10⁹ Ω | Green surface, black backing | Cut to size; rolls cut to bench dimensions |
| MS-E026 | — | — | — | Blue; options in black, coffee brown, gray, sky blue, green | Cut to size |
How to Read This Table
A dash is information, not a gap in the range. A dash means the model's own product page does not publish that field. It does not mean the property is absent — it means the value has to be confirmed with the enquiry. Thirteen of the 26 pages do not publish a surface resistance value, and six do not name a base material, describing a two-layer construction instead.
Material. Nine pages name PVC and eleven name rubber. Where a material is named, the construction is two-layer: a static-dissipative coloured top layer over a black conductive backing layer. The PVC models that publish a thickness are all 2 mm. The rubber models cover the wider thickness span, up to the 1–10 mm sheet rolls.
Surface resistance. Eleven models publish 10⁶–10⁹ Ω. Two pages state their resistance differently: MS-E013 publishes 10⁷–10⁹ Ω for its green surface, and MS-E020 publishes a top-surface volume resistance of 1.0 × 10⁵ to 1.0 × 10⁸ Ω rather than a surface resistance. Read those two rows as written on their product pages, not as the range standard.
Thickness. Sixteen pages publish a thickness. Ten models are a fixed 2 mm; MS-E015 and MS-E017 offer 2, 3 and 5 mm; MS-E021 and MS-E022 rolls run from 1 mm to 10 mm. For what thickness changes in use, see the ESD mat thickness guide.
Sizes. Most models are cut to the customer's dimensions rather than sold in fixed mat sizes. Fixed roll dimensions exist on three models: MS-E010 (10 m rolls in seven widths from 0.4 m to 1.5 m), MS-E021 and MS-E022 (10 m × 1 m or 1.2 m). The custom-cut PVC models list widths up to 1.5 m.
What the table does not show. Individual product pages publish further data that does not fit one shared column: backing-layer resistance (10³–10⁵ Ω on several pages; 10³–10⁶ Ω on MS-E025), static decay time, hardness (60° ± 5° on MS-E017) and a short-term temperature resistance (260 °C on MS-E001). No product page in this range publishes an MOQ; the pages state that order quantities suit sample evaluation, trial sales and workstation projects.
How to Choose From the Table
Start with the two fields your ESD control plan fixes — material and surface resistance — then narrow by thickness and size:
- If the resistance value must be documented before ordering, start from the eleven models that publish 10⁶–10⁹ Ω on their product pages, and confirm the test method with your enquiry.
- If you need a fixed 2 mm mat in a choice of colours, the PVC models MS-E001 to MS-E004 and MS-E007 publish the full set: material, thickness, resistance and colours.
- If you need coverage wider than a single bench, compare the roll models: MS-E021 and MS-E022 for 1–10 mm rubber sheet, MS-E010 for a 2 mm roll in widths up to 1.5 m.
- If the mat must match a drawing — holes, notches, rings or irregular shapes — MS-E003 is cut to drawing and MS-E018 is cut into sheets, rings and custom shapes; grounding snaps can be fitted at the positions you specify.
For the full decision sequence — working conditions, grounding and sample evaluation — see how to choose an ESD table mat.
Frequently Asked Questions
How many of the 26 models publish a surface resistance of 10⁶–10⁹ Ω?
Eleven models publish exactly that range on their product pages: MS-E001, MS-E002, MS-E003, MS-E004, MS-E005, MS-E007, MS-E008, MS-E017, MS-E021, MS-E023 and MS-E025. MS-E013 publishes 10⁷–10⁹ Ω for its green surface, and MS-E020 publishes a volume resistance instead. The remaining pages do not state a resistance value, so it has to be confirmed with the enquiry.
What is the difference between the PVC and rubber models?
The product pages name PVC for nine models and rubber for eleven; six pages describe a two-layer construction without naming the base material. Every PVC model that publishes a thickness is 2 mm. The rubber models span the wider range: 2–3 mm bench mats, 2/3/5 mm sheets and 1–10 mm rolls. Both families use a dissipative top layer over a conductive black backing where the construction is described.
Which models come as rolls with fixed dimensions?
Three. MS-E021 and MS-E022 are rubber sheet rolls of 10 m × 1 m or 1.2 m, in thicknesses from 1 mm to 10 mm. MS-E010 is a 2 mm roll, 10 m long, in seven widths from 0.4 m to 1.5 m. The other models are supplied as rolls or sheets without a fixed roll size on their pages, and are cut to the dimensions ordered.
Can these mats be cut to a non-standard size or shape?
Yes, according to the product pages. Custom cutting is offered across the range, including holes, notches, rounded corners and cutouts. MS-E003 is manufactured to your drawing, and MS-E018 is cut into sheets, rings and custom shapes. Grounding snaps can be installed at the positions you specify — state the positions when you send the drawing.
Is there a minimum order quantity for these models?
No product page in the MS-E001–MS-E026 range publishes an MOQ. The pages state that order quantities suit sample evaluation, trial sales and workstation projects, and that paid samples are available on several models. Send your dimensions, thickness and quantity, and the quotation confirms the available options for that model.
Do all 26 models come in the same colours?
No. Green, blue, gray and black is the standard set on the PVC models MS-E001, MS-E002, MS-E004 and MS-E020. Most rubber models are a green surface over a black backing. MS-E026 is blue with options in black, coffee brown, gray, sky blue and green, and MS-E023 and MS-E024 add matte and glossy finish options. Six models also list custom colours on request or as shown in their product photos.

